Toolbar

Toggle the Toolbars

The View Menu contains the master control for displaying, or turning off, the individual Single-clickToolbars. Click on the Toolbar names on the drop-down menu to see the individual toolbar.

Toolbars

With all Toolbars open, the Toolbar portion of the Main Window appears similar to the image below.

Note: In addition to these Toolbars, there is an Instruction Toolbar, which is located at the bottom of the Ladder Editor.

File Toolbar

Edit Toolbar

View Toolbar

Setup Toolbar

PLC Toolbar

Monitor Toolbar

Program Toolbar

Window Toolbar

Connection Status

Indicates that the PLC is Offline.

Indicates that the PLC is Online.

Indicates that the PLC is currently in RUN mode.

Indicates that the PLC is currently in STOP mode.

Indicates that there are no existing PLC Errors.

Indicates that there is an existing Error with the PLC.

Note: This button has three appearances in the same space. The word "Offline" appears when the PLC is not connected. STOP appears when the PLC is connected but not in Run Mode. RUN appears when the PLC is connected and is in Run Mode.

Show/Hide Toolbar

Click to toggle the respective Nicknames, Address Comments, Rung Comments or Coil Area button ON or OFF.