XG5000 Example Code for L7C

This section shows some sample code to enable the servo, select the drive move index, and for starting motion.

Drive indexes need to be configured using Drive CM (see Configuring Indexes in Drive CM for L7C Servo) or use the example in XG5000 Code to Write Index Values over Modbus RTU to write index data over Modbus RTU.
The example code is available in XEM_L7C_ModRTU_Example.zip and can be downloaded from Example Applications.

Step	Action
1	Open the Local Variables underScan Program. The example shows the scan program named “NewProgram”.
2	Create the local variables shown below.
3	Copy the example code below.

Step

Action

Open the Local Variables underScan Program. The example shows the scan program named “NewProgram”.

Create the local variables shown below.

Copy the example code below.

LP214-4