Omron Host Link Adapter (C200/C500) Error Codes

Topic: CM287

The following tables list the Errors that can be generated by the Omron Host Link Adapter (C200/C500).

This Table provides reference information for Error Codes displayed by the C-more Panels. If the Error Code is PLC-499, this Error Code identifies an Error that is generated by the connected PLC. The PLC-499 Error Message includes a four digit Hexadecimal value displayed at the end of the message. This value can be found in the specific PLC Error tables to determine the cause of the Error.

For PLC specific Error Codes, make sure you are viewing the correct topic and locate the PLC Specific Errors Table found below.

For more information about error codes specific to C-More panels, see C-More Error Codes.

Note: The following Errors are generated from the designated PLC, monitored by the C-more Panel, and displayed on the panel screen if active. Refer to the specific PLC user manual for further details. These manuals are available online and for download. You can download user manuals at www.automationdirect.com.

PLC Errors for Omron Host Link Protocol
Error Message	Description
0X00	Normal Completion.
0X01	Not executable in RUN mode.
0X02	Not executable in MONITOR mode.
0X03	Not executable with PROM mounted.
0X04	Address over (Data overflow).
0X0B	Not executable in PROGRAM mode.
0X0C	Not executable in DEBUG mode.
0X0D	Not executable in LOCAL mode.
0X10	Parity error.
0X11	Framing error.
0X12	Overrun.
0X13	FCS error.
0X14	Format error (parameter length error).
0X15	Entry number Data error (parameter error, Data code error, Data length error).
0X16	Instruction not found.
0X18	Frame length error.
0X19	Not executable (due to Un-executable error clear, non-registration of I/O table, etc.).
0X20	I/O table generation impossible (unrecognized remote I/O unit, channel over, duplication of optical transmitting I/O unit).
0XA0	Abort due to parity error in transmit Data under process.
0XA2	Abort due to overrun in transmit Data under process.
0XA3	Abort due to FCS error in transmit Data under process.
0XA4	Abort due to format error in transmit Data under process.
0XA5	Abort due to frame length error in transmit Data under process.
0XA8	Abort due to entry number Data error in transmit Data under process.
0XB0	Un-executable due to program area capacity other than 16k bytes.