XG5000 Host Table (IP Addresses)

XG5000 allows the user to create a Host Table to limit access to the XMC. The host table stores IP addresses of hosts that are allowed to connect to the CPU.

  • IP addresses not on the list will not have access to the CPU.

  • Up to 16 IP addresses can be registered.

Step Action
1

In an open XG5000 project, double-click on the local Ethernet connection in the Project window.

2

Choose the Security Setting tab from the window that opens up.
3

Select the checkbox Enable host table to turn on host table settings.
4

Enter IP addresses for hosts that are allowed to connect to the CPU.
5

Press OK to accept settings.
6 Perform a Check program and Write new XG5000 project to the CPU to enable the host table.
Step Action
1

In an open XG5000 project, double-click on the local Ethernet connection in the Project window.

2

Choose the Security Setting tab from the window that opens up.
3

Clear the checkbox Enable host table to turn off host table settings.
4 Press OK to accept settings.
5 Perform a Check program and Write new XG5000 project to the CPU to disable the host table.

 

 

 

 

 

 

 

 

 

 

 

 

LM119