Clear All PLCs Command

Clear ALL PLCs is used to delete everything from the XMC.

• Warning: Clear ALL PLCs deletes parameters, data and passwords.

• Warning: Clear ALL PLCs will delete PLC IP address settings. IP Address is set to 0.0.0.0. Requires connecting over USB to set the IP address again.

• Warning: Clear All PLCs will erase all motion programs.

Step	Action
1	Connect to the XMC with XG5000 software.
2	Select Online è Reset/Clear è Clear All PLCs...
3	Press Yes to delete all data from the XMC. Press No to cancel.
4	Press OK to acknowledge all data has been erased. Note: After doing Clear All PLCs, XG5000 will only be able to connect the XMC over USB connection.

 

 

 

 

 

 

 

 

 

 

 

 

LM107-3