Adjust Basic Parameters of XEL-BSSRT

Step	Action
1	Open Basic Parameter in the Project window.
2	Adjust settings in the Basic Operation Settings tab.
3	Configure settings in the Communication Basic settings tab. These settings are used when the station number switches are set to 00. Note: XEL-BSSRT must be rebooted to apply new IP address.
4	User can setup Host Table Settings tab if the XEL-BSSRT needs to limit which IP addresses it can communicate with. Skip to Step 5 if not using this option.
5	Press OK button to finish Basic Parameter Setting.

 

 

 

 

 

 

 

 

LP216-3