Temperature Sensor Special Module Monitoring
After getting online with the XEM CPU, the user can open Special Module monitoring to see current status of temperature sensor input channels.
| Step | Action |
|---|---|
| 1 |
Open Monitoring menu รจ Special Module Monitoring.
|
| 2 |
Select the slot the Temperature Sensor I/O module is in (for this example it is installed in Slot 2).
|
| 3 |
Press Monitor to open Special Module Monitoring. |
| 4 |
Select the channel to monitor and press Start Monitoring.
|
| 5 |
Press Stop Monitoring or Close when finished.
|
If the XEM CPU is in STOP mode, XG5000 allows temperature sensor input settings to be tested in the Special Module Monitor.
| Step | Action |
|---|---|
| 1 | Change the setting to Test in the Setting Value column. |
| 2 | Press Start Monitoring. |
| 3 |
Press Test to test new Setting Value. This does not change module configuration. The I/O configuration must be done in the I/O Parameter screen.
|
LP118-3