LS Electric Error Codes
LS Electric Error Codes |
Topic: CM145 |
The following table provides reference information for Error Codes specific to the LS Electric XEM Ethernet PLC
The error Message is displayed across the top of the panel screen.
Error Code PLC-499 shows any Errors that are generated by the connected PLC. The PLC-499 Error Message includes a four-digit hexadecimal value displayed at the end of the message. These values appear in the table below.
For more information about error codes specific to C-More panels, see C-More Error Codes.
|
|
Note: The following PLC errors are monitored by the C-more panel. Active errors display on the panel screen. Refer to the specific PLC user manual for further details. These manuals are available online and for download. You can download user manuals at www.automationdirect.com. |
|
Error Code |
Error Name |
Possible Cause |
|---|---|---|
|
0x0010 |
Device type name error |
An attempt was made to access an address type that does not exist |
|
0x0011 |
Device address format error |
An attempt was made to access an invalid address number. |
|
0x0012 |
Data error |
Incorrect Data type used |
|
0x0022 |
Frame structure error |
— |
|
0x0024 |
Data type mismatch |
— |
|
0x0071 |
Maximum size exceeded |
An attempt was made to access an address number that is out of range. |
|
0x0075 |
Company ID error |
— |
|
0x0076 |
Data length information error |
— |
|
0x0077 |
Checksum error |
— |
|
0x0078 |
Unknown command error |
— |
Related Topics